WeatherTRAK Mobile 33.9.0 - App Store

WeatherTRAK Mobile equips you with the tools to manage and operate your WeatherTRAK Smart Irrigation sites. This is performed within one intuitive interface. Access all your Sites, Controllers, and Stations easily and remote water, manage alerts, place assets on a map, troubleshoot issues, and adjust Controller and Station programming. WeatherTRAK Mobile gives you the freedom and flexibility to manage your powerful HydroPoint Smart Water Management solutions.

New in version 3.6:

New Feature:

The new Station High Flow Alert and Manager High Flow Alert test becomes available when an alert containing more than one station has occurred. The test will operate each station and help you determine which station (or mainline) caused the alert. Requires an OptiFlow enabled controller.
Workflow Improvements:
A selected Controller’s Setting page can now be accessed directly from the Station’s List page via an icon in the top right corner of the page.

A selected Controller’s Station List page can now be accessed directly from the Controller Setting page via an icon in the top right corner of the page.

In Site Map, the Station Location asset and Station Valve asset, if assigned to the same Station, link to each other via their popup box.

In Site Map, the Station Location asset now has complete Start & Stop control of the Station.

In Site Map, an icon leading to the Station Programming page has been added to the popup box of the Station Location and Station Valve asset.

OptiFlow Controllers in Standard Schedule mode can be programmed via the Program tab on the Controller Settings page.

The Active Alerts page will display an Update Alert Status icon when Stations with alerts are present.

Starting single station manual irrigation during the scheduled irrigation water window will introduce a new popup dialog with the added option to operate the single station along with any scheduled irrigation.
General:

The Controller model, firmware version, and modem type can be found listed at the top of the Program tab on the Controller Settings page.

The Controller status is now displayed in the Controller icons in Site Map.

Various bug fixes and under-the-hood improvements.
WeatherTRAK Mobile Features:
Site Overview page provides the local weather, Controller mode summary, and Alert summary for each Site.

Manage Active Alerts for any selected Controller. View each alert to learn about possible causes. Clear flow and electrical alerts once the repairs are made.

Adjust the percentage of each Station in one convenient location.

Rain Pause can be created or canceled for any Controller.

Create a Master Valve Override to grant access to a mainline.

Unlock or Lock the panel of an OptiFlow enabled Controller.

Program a WeatherTRAK Controller straight from the app, speeding up the installation or fine-tuning.

Remotely operate Stations individually or in groups (Stacked/Overlapped). Start a Program, or queue up several Programs to provide supplemental watering.

Build a virtual as-built with the powerful Site Map by identifying system components and Site details, introducing an invaluable time-saving tool that you’ll depend on.

Place the Station Location for each Station, enabling from-the-map remote control.

Add photos and details to each asset placed on Site Map.

Help & Support page links to up-to-date knowledge base articles and WeatherTRAK support contact options.

Built-in knowledge base help in both English and Spanish.
Supported controllers:

. OptiFlow XR
. ET Pro3
. LC and LC+
. Pro2
Note: To ensure optimal performance, make sure your controller is always running on the latest firmware.

Version History Operating Status, Bug Fixes and Improvements 3.9.0 Sep 9 Bug Fixes and Performance Improvements 3.8.24 Mar 14 This update introduces minor fixes and performance improvements. It also includes three major features to enhance your WeatherTRAK experience with improved login capabilities, self-service controller activation, and better site management tools.

New Features
- HydroPoint SSO Login: Sign in with your HydroPoint account for seamless access across all HydroPoint applications.
- Controller Self-Activation: Installers can now activate new controllers directly from the mobile app with a guided step-by-step process including QR code scanning, PIN verification, and site assignment.
- Controller Status Filters: Quickly filter controllers by status (Active, Inactive, Deactivated) with visual status breakdowns on the site overview page.
Improvements
- Enhanced security with centralized authentication through HydroPoint SSO.
- Streamlined controller deployment with comprehensive validation and error tracking during activation.
- Improved site management with one-tap status filtering for faster troubleshooting. 3.8.23 Mar 1 This update introduces three major features to enhance your WeatherTRAK experience with improved login capabilities, self-service controller activation, and better site management tools.
New Features
HydroPoint SSO Login: Sign in with your HydroPoint account for seamless access across all HydroPoint applications.
Controller Self-Activation: Installers can now activate new controllers directly from the mobile app with a guided step-by-step process including QR code scanning, PIN verification, and site assignment.
Controller Status Filters: Quickly filter controllers by status (Active, Inactive, Deactivated) with visual status breakdowns on the site overview page.
Improvements
Enhanced security with centralized authentication through HydroPoint SSO.
Streamlined controller deployment with comprehensive validation and error tracking during activation.
Improved site management with one-tap status filtering for faster troubleshooting. 3.8.22 Feb 21 Enjoy a smoother experience with performance improvements and new pagination on the Sites page for easier navigation and faster access across multiple accounts. 3.7.4 10/27/2025 3.7.2
Bug fixes and improvements 3.7.2 04/15/2025 New Feature:

Move the Controller asset icon to your current location. A new icon has been added to the Controller asset popup, which, when pressed, will relocate the icon to your current location on the map.
Fixes:

Various bug fixes to address rare crashes and errors. 3.6.2 09/22/2022 3.6.1: Stability improvements and fixes 3.6.1 07/13/2022 New Feature:

The new Station High Flow Alert and Manager High Flow Alert test becomes available when an alert containing more than one station has occurred. The test will operate each station and help you determine which station (or mainline) caused the alert. Requires an OptiFlow enabled controller.
Workflow Improvements:
A selected Controller’s Setting page can now be accessed directly from the Station’s List page via an icon in the top right corner of the page.

A selected Controller’s Station List page can now be accessed directly from the Controller Setting page via an icon in the top right corner of the page.

In Site Map, the Station Location asset and Station Valve asset, if assigned to the same Station, link to each other via their popup box.

In Site Map, the Station Location asset now has complete Start & Stop control of the Station.

In Site Map, an icon leading to the Station Programming page has been added to the popup box of the Station Location and Station Valve asset.

OptiFlow Controllers in Standard Schedule mode can be programmed via the Program tab on the Controller Settings page.

The Active Alerts page will display an Update Alert Status icon when Stations with alerts are present.

Starting single station manual irrigation during the scheduled irrigation water window will introduce a new popup dialog with the added option to operate the single station along with any scheduled irrigation.
General:

The Controller model, firmware version, and modem type can be found listed at the top of the Program tab on the Controller Settings page.

The Controller status is now displayed in the Controller icons in Site Map.

Various bug fixes and under-the-hood improvements. 3.6 06/14/2022 Fixed

"Water Window 1 and 2 are overlapping" message on the Controller Programming page is now displaying correctly.
Controller Mode summary on the Site Overview page is now listing modes correctly.
Controllers listed under Unlock/Lock on the Access tab are now displaying serial numbers correctly.
Scheduled irrigation will now pause correctly when manual irrigation is initiated at the same time - OptiFlow controllers.
Various under-the-hood improvements to improve stability 3.5.1 10/26/2021 New in Version 3.5

• Site Map: Asset icon display count options are now 500 (default) and No Limit.
• Site Map: The Station Location asset now has Notes capability.
• Dialog: If changes are made on any of the Station and Controller Programming pages and not applied, when attempting to leave, a dialog box will appear providing an option to apply those changes.
• Station Programming: All the programming settings found in WeatherTRAK Central, under Stations, on the Program page are now available. This includes all the advanced settings for stations from Auto Mode and the settings from User Mode.
• Station Programming: Each Station's Current Depletion can now be referenced and changed. This setting can be found at the bottom of GLOBAL.
• Station Programming: Each Station's Flow Rate and High Flow Threshold can be user-defined. Otherwise, any learned flow will be displayed along with the calculated High and Low Flow Threshold values. If a learned Flow Rate and calculated High Flow Rate are user-defined, (User) will appear next to the setting name in blue. Enter a value of 0 (zero) to return to the learned and calculated values.

Note: The calculated values are defined by the Station High Flow Offset % and Station Low Flow Offset % found on the new Controller Programming page, or on WeatherTRAK Central under Flow, on the Program page.
• Controller Settings: Master Valve Override MVO and Controller Unlock/Lock can now be found under a single tab titled ACCESS. New messaging for controllers that do not support these features has been added.
• Controller Programming: A new tab has been added on the Controller Settings page titled PROGRAM. Controller programming settings can be found under this tab. These are the same settings that are on the Program page for each controller on WeatherTRAK Central.

Note: Due to the advanced requirements, some of the OptiFlow controller programming is still performed via the Configure page on WeatherTRAK Central.

• Setup: Controller settings found in the Setup section of the Program page on WeatherTRAK Central are available.
• Flow: Controller settings found in the Flow section of the Program page on WeatherTRAK Central are available.
• Days/Times: Controller settings found in the Days/Times section of the Program page on WeatherTRAK Central are available.
• Custom Plants can only be found on WeatherTRAK Central.
• General: If a password reset has been set, you can now create a new password within the app.
• General: When a new controller is powered up for the first time and begins the 10 – 15 minute-long server synchronization process. The Controllers page will display a sync icon next to the controller if present. A message will display if the controller is selected.
• General: It is our continuing goal to provide a faster, more reliable, and more user-friendly experience. Therefore, bug fixes, minor visual tweaks, and under-the-hood improvements are always a part of a WeatherTRAK Mobile release. 3.5 08/05/2021 Minor bug fixes and improvements. 3.3.1 03/31/2021 • New communication architecture aims to improve reliability and performance consistency.
• Longer station, controller, and site names are better accommodated, more notably on smaller-sized screens.
• Default zoom level in Site Map is increased, putting the site and the assets closer in view upon opening.
• Asset icons in search queries are now appropriately scaled.
• Station numbers have been added next to the station name in the Station Location asset popup.
• “Location on Slope” setting has been added to Station Programming.
• Changing controller mode now shows the newly selected mode name blink during the time it takes for the change to occur. Blinking stops once the new mode is set.
• “Activating a manual run will pause all scheduled irrigation. Continue?” will now only show once per session for the selected controller once dismissed.
• Accommodates triple-digit alert numbers.
• Improved visual feedback in Multiple/Stacked mode during operation.
• Various graphical tweaks throughout the application. 3.3 03/02/2021 New in version 3.2.2:

• Fixed issue where User Rain Pause was not accessible during both enabled or disabled WeatherTRAK Rain Pause Events. 3.2.2 11/22/2020 WeatherTRAK enables you to manage and operate your WeatherTRAK smart irrigation sites from anywhere, on-site, or on the go.

Within one intuitive interface, you can access all your accounts, sites, controllers, and stations to activate manual irrigation easily, manage alerts, map out your site, efficiently troubleshoot issues, and adjust programming and controller modes. WeatherTRAK gives you the freedom and flexibility to manage your smart water management solution from anywhere.

New in version 3.2.1:

• Fixed issue where single site accounts with large controller counts were causing significant performance slowdowns.
• Fixed issue with large alert counts not displaying correctly.
New in version 3.2:

• Proactive Notification Banner will popup to display important messages regarding server maintenance updates, for example.
• Refined user interface throughout the app.
• Added alert Icons and highlight color to add clarity to the severity and type of alert being viewed throughout the app.
• Ability to independently clear flow or electrical alerts from the Active Alerts page.
• Alert Icons and highlight color to add clarity to the severity and type of alert being viewed on the Stations page.
• Ability to place a Station Location Asset directly from the Station Settings/Programming page.
• Ability to view an existing Station Location Asset directly from the Station Settings/Programming page.
• Ability to Start/Stop a station for a defined period of time from the Station Settings/Programming page.
• Consolidated view of Site and Controllers for ones managing a single site.
• Ability to view station level alerts on the Station Settings/Programming page.
• Alerts now total Critical/Major and Minor/Low on the Sites and Controller pages.
• Icon indicator on the Station page when Station Location Assets are assigned to a station.
• Individual program overview added to the Program tab on the Stations page.
• Current app version number now displayed at the top of the Support and Profile pages.

Also included:

• Access any of your sites, controllers, or stations
• Create a virtual as-built of your site using the Site Map.
• Navigate to individual assets on your site using GPS navigation.
• Get an overview of your site that includes a 7-day weather forecast and current alerts and controller statuses.
• Take photos and notes for individual assets and keep track of crucial details for troubleshooting.
• Three manual irrigation modes: single station, multiple station, and by program
• View currently running stations for manual irrigation
• Create manual irrigation sequences with specific times for each station
• Improved manual irrigation response time
• Station Programming: Configure new stations or adjust settings right from the app
• Set the controller mode (on, off, winterized, shutdown)
• Set rain pauses and view the irrigation cycle resume time and date
• Override the Master Valve for hose irrigation or troubleshooting, with automatic shut-off
• Adjust station runtime percentages
• View and clear alerts
• Use the app in either English or Spanish
• Built-in help in both English and Spanish

Supported controllers:

• OptiFlow XR
• ET Pro3
• LC and LC+
• Pro2

Note: For access to all the mobile features, and to ensure optimal performance, make sure your controller has the latest firmware installed.
Update your controller over-the-air with the Cloud Update Key or OptiFlow Key.
For questions or to upgrade your firmware, contact support@hydropoint.com 3.2.1 10/03/2020 WeatherTRAK enables you to manage and operate your WeatherTRAK smart irrigation sites from anywhere, on site or on the go.

Within one intuitive interface, you can access all your accounts, sites, controllers, and stations to easily activate manual irrigation, manage alerts, map out your site, efficiently troubleshoot issues, and adjust programming and controller modes. WeatherTRAK gives you the freedom and flexibility to manage your smart water management solution from anywhere.

New in version 3.2:

• Proactive Notification Banner will popup to display important messages regarding server maintenance updates, for example.
• Refined user interface throughout the app.
• Added alert Icons and highlight color to add clarity to the severity and type of alert being viewed throughout the app.
• Ability to independently clear flow or electrical alerts from the Active Alerts page.
• Alert Icons and highlight color to add clarity to the severity and type of alert being viewed on the Stations page.
• Ability to place a Station Location Asset directly from the Station Settings/Programming page.
• Ability to view an existing Station Location Asset directly from the Station Settings/Programming page.
• Ability to Start/Stop a station for a defined period of time from the Station Settings/Programming page.
• Consolidated view of Site and Controllers for ones managing a single site.
• Ability to view station level alerts on the Station Settings/Programming page.
• Alerts now total Critical/Major and Minor/Low on the Sites and Controller pages.
• Icon indicator on the Station page when Station Location Assets are assigned to a station.
• Individual program overview added to the Program tab on the Stations page.
• Current app version number now displayed at the top of the Support and Profile pages.
Also included:

• Access any of your sites, controllers, or stations
• Create a virtual as-built of your site using the Site Map.
• Navigate to individual assets on your site using GPS navigation.
• Get an overview of your site that includes a 7-day weather forecast, and current alerts and controller statuses.
• Take photos and notes for individual assets and keep track of crucial details for troubleshooting.
• Three manual irrigation modes: single station, multiple station, and by program
• View currently running stations for manual irrigation
• Create manual irrigation sequences with specific times for each station
• Improved manual irrigation response time
• Station Programming: Configure new stations or adjust settings right from the app
• Set the controller mode (on, off, winterized, shutdown)
• Set rain pauses and view the irrigation cycle resume time and date
• Override the Master Valve for hose irrigation or troubleshooting, with automatic shut-off
• Adjust station runtime percentages
• View and clear alerts
• Use the app in either English or Spanish
• Built-in help in both English and Spanish
Supported controllers:
• OptiFlow XR
• ET Pro3
• LC and LC+
• Pro2
Note: For access to all the mobile features, and to ensure optimal performance, make sure your controller has the latest firmware installed.
Update your controller over-the-air with the Cloud Update Key or OptiFlow Key.
For questions, or to upgrade your firmware, contact support@hydropoint.com 3.2 09/29/2020 New (Mobile):

Ability to add photos to the Station Location Asset in Site Map. This can be found in both the asset popup and on the asset details page.

Ability to choose the default time to manually operate a Station Location asset via its asset popup.

“Show All/Hide All” assets button has been added to the “Place Asset” screen, enabling the user to hide existing assets while placing a new one.

Ability to drag-and-drop the selected stations while under “Multiple” manual - on the Stations Page. (only in “Stacked” if an Optiflow enable controller)

“Currently Watering” bar has been added and displays the number of all stations that are currently operating on a specifically chosen site. Once pressed the user is taken to a summary page where stations can be stopped individually, at a controller level, or all together.

Various user notifications that communicate if, or when manual irrigation will interfere with other scheduled events, like scheduled irrigation or learned flow.

For OptiFlow enabled controllers only:

Ability to run selected stations while under “Multiple” manual in either “Stacked” (sequentially), or “Overlap” (simultaneously). Up to nine (9) stations can be selected per controller in “Overlay” and are displayed in the new “Station Capacity” bar when in that selection mode.

Improved (Mobile):

Users now have the ability to access station settings and change default time after the stations have been selected and during operation while under “Multiple” manual - on the Stations Page.

Station Location asset popup will now display the alert (if one is present) instead of the “Start” button.

“Communication Delay” popup will now dismiss itself when the communication delay has been resolved.

“Controller Mode” button now only display the selected controller mode and not the controller status.

Fixed (Mobile):

App might hang when loading a large number of sites. 3.1.4 07/24/2020 Fixed
* Selecting a station runtime for an individual station is now faster.
* Case-insensitive searches.
* Scrolling now works when viewing an Active Alert.

Improved
* User experience with the “Please Wait” screen during manual operation.
* Messaging and options while viewing the “Communication Delay” and "Offline" dialog boxes. 3.1.3 06/11/2020 Create a virtual as-built of your site using the Site Map! Get an overview of your site that includes a 7-day weather forecast, and current alerts and controller statuses.
Contains bug fixes as well. 3.1.1 04/01/2020 Create a virtual as-built of your site using the Site Map! Get an overview of your site that includes a 7-day weather forecast, and current alerts and controller statuses. 3.1 03/27/2020 Bug fixes related to the maps. 3.0.7 02/20/2019 3.0 08/03/2018